Choose from our Bollard styles, or we can customise them your exact specifications.
Timber Bollards for landscape projects, Road and Pedestrian management and Fencing. We make to order only because the range, shape and size of timber bollards is limitless.
Below we have of some more commonly used bollards, along with different bollard tops, collars, Holes and reflectors.
The most common size Bollards are 1.2 to 1.8 meters long and 125 x 125, 150x 150 & 200 x 200mm square, in both Sawn or Dressed finishes. When dressed, the sizes are 115 x 115, 140 x 140 & 190 x 190mm
We can supply bollards up to 300mm square and 3.6 meters long. The timbers we supply are White Cypress pine, un-seasoned Spotted Gum and Iron Bark.
The most used timber for bollards is CYPRESS PINE, this is due too its class 2 below ground rating and class 1 above, low shrinkage rate of 2.9% and its natural resistance to white ants.
For a Quotation please click on the link or call us on 03 9724 9600.
Some Architects are now asking for Seasoned bollards but the only way to achieve this is to air dry the posts in racks for up to Two years depending on the species.
Posts in any species come from the mills un-seasoned, they can not be kiln dried due to the size and with time restraints and the huge costs involved, air drying isn't viable. Bollards will naturally season over time once installed.
Be assured we only use the very best Sustainable F7 structural White Cypress Pine (Callitris Glaucophylla) for your Bollard project that will last a lifetime.
Real data shows it has a fantastic lifespan on just the smallest 50 x 50mm post tested, lasting up to 40 years above ground and 24.5 years in ground.
Can't decide? Well call in and check out our display at 14 Shelley Ave Kilsyth
Bollard Tops
Pyramid
Dome
Peak
Chamfer
Splay
We manufacture bollard tops in a wide range of configurations. Common standards include a 20mm chamfer or a 35° pyramid, but we aren't limited to these. We can custom-build almost any profile to suit your project requirements.
Bollard Collars
18mm Square
25mm Square
18mm Round
25mm Round
18mm Vee
We produce collars ranging from 4mm to 300mm wide (up to 15mm deep). Our standard size is 18mm x 10mm (Square), but we specialize in custom solutions. Whatever your specific requirement, our team will make it happen.
Chain, Pipe or Cable Holes
Custom drilling is available for chain, pipe, or cable (up to 75mm diameter)and we can accommodate large-format bollards up to 300mm in width. For ease of installation, we recommend a clearance of 5mm for pipes and 4mm for chains & cables. We can also CNC Route and paint Council Logos.
Bollard Extras
Impact Hole.
Delineator & Chamfered Edges.
Scalloped Edges & Faces
IImpact protection holes are essential for bollards installed along roadsides, parks, and reserves. Designed to lessen the force of a vehicle collision, they are typically paired with delineators recessed 10mm into the timber to prevent vandalism (Red for approach, White for departure).
Decorative & Safety Edging: While scalloped edges offer a decorative finish, chamfered edges serve a dual purpose: enhancing the aesthetic while removing sharp corners and splinters for a safer, user-friendly finish.
Why use White Cypress Pine?
✅ Naturally Termite Resistant: Contains natural oils that resist white ants and is not susceptible to Lyctid Borer attack (chemical-free). ✅ Class 2 In-Ground Durability: Life expectancy of 15–25 years in the ground and Class 1 above ground, 40+ years. ✅ Low Shrinkage Rate: A very low 2.6% shrinkage rate means minimal warping and movement compared to other timbers. ✅ F7 Structural Rated: A moderately hard Australian softwood (Janka rating ~6.4 kN) that offers the perfect balance of strength and machinability. ✅ Sustainably Sourced: Forest-certified and affordable Australian timber. ✅ Beautiful Character: Features a striking yellow-brown to orange-brown heartwood with a fine texture, straight grain, and distinctive tight knots.
Because White Cypress Pine is a naturally durable timber (rated Class 1 Above Ground and Class 2 In-ground), it already contains the natural resins required to protect it from fungi, insects, and decay, making it a popular chemical-free choice.
NO hazardous chemical treatments (like CCA) or need for labour intensive installation of chemical treatment rods. Keep your project clean and simple.
While our timber is naturally Class 1 durable, we recommend this simple step to make it last a lifetime, by adding a Non-hazardous, creosote-based paint.
Adding (Bondall or Diggers Eco) to the buried section of your post, even on the highest in-ground class timbers is an Eco-friendly step and the most effective wat to achieve the longest possible lifespan for your fencing and other projects.
Don’t Wait to Paint: Zero Weathering Required
Timbers like Merbau and Spotted Gum require a "seasoning" period for the sun and rain to release natural oils and tannins. If you paint them too early, the finish fails. If you wait too long, the timber turns grey and splits White Cypress Pine is ready for the brush the moment it is delivered. ✅No Tannin Bleed: Don't worry about staining your concrete or pavers. ✅Superior Adhesion: The grain is ready immediately, oils penetrate deep into the timber, and paints bond securely for a finish that lasts years.
Trusted Since 1996
For nearly three decades, we've provided quality timber to a diverse clientele including Homeowners,Fencing Contractors, Land Developers, Landscape Architects, Government organisations, and Local Councils.
Below, you'll find just a few of the many Councils we supply.
